Configuring GMRP
Port based GMRP Configuration:
Port
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-48,7/1-24
Console> (enable)
Enabling GMRP on Individual Switch Ports
Note
You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally.
However, GMRP will not function on any ports until you enable it globally. For information on
configuring GMRP globally on the switch, see the
page
To enable GMRP on individual switch ports, perform this task in privileged mode:
Task
Step 1
Enable GMRP on an individual switch port.
Step 2
Verify the configuration.
This example shows how to enable GMRP on port 6/12 and verify the configuration:
Console> (enable) set port gmrp enable 6/12
GMRP enabled on port 6/12.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
Port
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-9,6/12,6/15-48,7/1-24
6/10-11,6/13-14
Console> (enable)
Disabling GMRP on Individual Switch Ports
You can change the per-port GMRP configuration regardless of whether GMRP is enabled globally.
Note
However, GMRP will not function on any ports until you enable it globally. For information on
configuring GMRP globally on the switch, see the
page
To disable GMRP on individual switch ports, perform this task in privileged mode:
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
40-14
40-13.
40-13.
Chapter 40
Configuring Multicast Services
GMRP Status Registration ForwardAll
Enabled
Normal
"Enabling GMRP Globally" section on
Command
set port gmrp enable mod/port
show gmrp configuration
GMRP Status Registration ForwardAll
Enabled
Normal
Disabled
Normal
"Enabling GMRP Globally" section on
Disabled
Disabled
Disabled
78-13315-02