Chapter 26
Working with Configuration Files
When you have verified that the currently running configuration is correct, enter the
Step 10
copy running-config startup-config command to save the retrieved configuration in NVRAM.
Otherwise, you will lose the new configuration if you restart the system.
This completes the procedure for downloading (retrieving) the configuration file.
Downloading the Configuration File from the Supervisor Engine Flash PC Card
To download the configuration file from the supervisor engine Flash PC card in PCMCIA slot 0, perform
this task:
Task
Step 1
At the EXEC prompt, enter enable
mode.
Step 2
Copy the stored running
configuration file to the MSFC
running configuration.
Step 3
Copy the stored startup
configuration file to the MSFC
running configuration.
78-13315-02
Command
Router> enable
Router# copy sup-slot0: file_name running-config
Router# copy sup-slot0:file_name startup-config
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Working with Configuration Files on the MSFC
26-13