Displaying Multicast Group Information - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Configuring IGMP Snooping
To display the dynamically learned multicast router information, perform these tasks in privileged mode:
Task
Display information on dynamically learned and
manually configured multicast router ports.
Display information only on those multicast
router ports learned dynamically using IGMP
snooping.
This example shows how to display information on all multicast router ports (the asterisk [*] next to the
multicast router on port 5/7 indicates that the entry was configured manually):
Console> (enable) show multicast router
IGMP enabled
Port
---------
1/1
2/1
5/7
Total Number of Entries = 3
'*' - Configured
Console> (enable)
This example shows how to display only those multicast router ports that were learned dynamically
through IGMP:
Console> (enable) show multicast router igmp
IGMP enabled
Port
---------
1/1
2/1
Total Number of Entries = 2
'*' - Configured
Console> (enable)

Displaying Multicast Group Information

To display information about multicast groups, perform these tasks in privileged mode:
Task
Display information about multicast groups.
Display only information about multicast groups
learned dynamically through IGMP.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
40-10
Vlan
----------------
1
2,99,255
*
99
Vlan
----------------
1
2,99,255
Chapter 40
Configuring Multicast Services
Command
show multicast router [mod/port] [vlan_id]
show multicast router igmp [mod/port]
[vlan_id]
Command
show multicast group [mac_addr] [vlan_id]
show multicast group igmp [mac_addr]
[vlan_id]
78-13315-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents