Chapter 22
Configuring IP Services
ICMP redirect packets are always rejected.
Note
Enabling or Disabling IP Forwarding
To view or change the IP forwarding configuration of the switches in the current fabric, perform the
following steps.
Step 1
Choose IP > Forwarding from the Fabric Manager menu tree.
To enable IP forwarding for a specific switch, check the RoutingEnabled check box.
Step 2
Viewing Information and Statistics
You can monitor a variety of information and statistics about IP services from Fabric Manager and
Device Manager.
This section includes the following topics:
•
•
•
•
•
Viewing VRRP Statistics
To monitor VRRP statistics, click the Statistics tab on the VRRP dialog box. The VRRP dialog box with
the Statistics tab selected is displayed.
Viewing TCP Information and Statistics
To view TCP information from the Device Manager, choose Mgmt TCP/UDP from the IP menu.
To monitor TCP statistics from the Fabric Manager, choose IP > Mgmt Statistics from the menu tree
and click the TCP tab. To monitor TCP statistics from the Device Manager, choose Statistics from the
IP menu and view the TCP tab.
Viewing UDP Information and Statistics
To view User Datagram Protocol (UDP) information, from the Device Manager, choose Mgmt
TCP/UDP from the IP menu and click the UDP tab.
OL-7753-01
Viewing VRRP Statistics, page 22-15
Viewing TCP Information and Statistics, page 22-15
Viewing UDP Information and Statistics, page 22-15
Viewing IP Statistics, page 22-16
Viewing ICMP Statistics, page 22-16
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Enabling or Disabling IP Forwarding
22-15