Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 345

Chapter 16 Configuring Access Control
To display PBF status and MAC address, perform this task in privileged mode:
Task
Display PBF status and MAC address.
To enable PBF, perform one of these tasks in privileged mode:
Task
Enable PBF with a default MAC address.
Enable PBF with a specific MAC address.
This example shows how to check PBF status and MAC address, enable PBF with a default MAC
address, and verify the change:
Console> (enable) show pbf
Pbf status
-----------
not set
Console> (enable)
Console> (enable) set pbf
PBF committed successfully.
Operation successful.
Console> (enable)
Console> (enable) show pbf
Pbf status
-----------
ok
Console> (enable)
This example shows how to enable PBF with a specific MAC address:
Console> (enable) set pbf mac 00-11-11-11-11-11
PBF committed successfully.
Operation successful.
Console> (enable)
Console> (enable) show pbf
Pbf status
-----------
ok
Console> (enable)
To disable PBF and clear the PBF MAC address, perform this task in privileged mode:
Task
Disable PBF and clear the PBF MAC address.
78-13315-02
Mac address
------------------
00-00-00-00-00-00
Mac address
------------------
00-01-64-61-39-c2
Mac address
------------------
00-11-11-11-11-11
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring Policy-Based Forwarding
Command
show pbf
Command
set pbf
set pbf [mac mac address]
Command
clear pbf
16-49