Disabling Vtp Version 2; Enabling Vtp Pruning - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 10 Configuring VTP

Disabling VTP Version 2

To disable VTP version 2, perform this task in privileged mode:
Task
Step 1 Disable VTP version 2.
Step 2
Verify that VTP version 2 is disabled.
This example shows how to disable VTP version 2:
Console> (enable) set vtp v2 disable
This command will disable the version 2 function in the entire management domain.
Warning: trbrf & trcrf vlans will not work properly in this mode.
Do you want to continue (y/n) [n]? y
VTP domain Lab_Net modified
Console> (enable)

Enabling VTP Pruning

To enable VTP pruning, perform this task in privileged mode:
Task
Step 1 Enable VTP pruning in the management domain. set vtp pruning enable
Step 2 (Optional) Make specific VLANs pruning
ineligible on the device. (By default,
VLANs 2–1000 are pruning eligible.)
Step 3 (Optional) Make specific VLANs pruning eligible
on the device.
Step 4 Verify the VTP pruning configuration.
Step 5 Verify that the appropriate VLANs are being
pruned on trunk ports.
This example shows how to enable VTP pruning in the management domain and how to make
VLANs 2–99, 250–255, and 501–1000 pruning eligible on the particular device:
Console> (enable) set vtp pruning enable
This command will enable the pruning function in the entire management domain.
All devices in the management domain should be pruning-capable before enabling.
Do you want to continue (y/n) [n]? y
VTP domain Lab_Network modified
Console> (enable) clear vtp pruneeligible 100-500
Vlans 1,100-500,1001-1005 will not be pruned on this device.
VTP domain Lab_Network modified.
Console> (enable) set vtp pruneeligible 250-255
Vlans 2-99,250-255,501-1000 eligible for pruning on this device.
VTP domain Lab_Network modified.
78-13315-02
Command
set vtp v2 disable
show vtp domain
Command
clear vtp pruneeligible vlan_range
set vtp pruneeligible vlan_range
show vtp domain
show trunk
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring VTP
10-9