System Log Message Format - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 27 Configuring System Message Logging
Table 27-1 System Message Log Facility Types (continued)
Facility Name
telnet
tftp
udld
vmps
vtp
Table 27-2
Table 27-2 Severity Level Definitions
Severity Level
0—emergencies
1—alerts
2—critical
3—errors
4—warnings
5—notifications
6—informational
7—debugging

System Log Message Format

System log messages begin with a percent sign (
displayed in the following format:
mm/dd/yyy:hh/mm/ss:facility-severity-MNEMONIC:description
Table 27-3
Table 27-3 System Log Message Elements
Element
mm/dd/yyy:hh/mm/ss
facility
severity
MNEMONIC
description
78-13315-02
Definition
Terminal Emulation Protocol
Trivial File Transfer Protocol
User Datagram Protocol
VLAN Membership Policy Server
VLAN Trunking Protocol
describes the severity levels supported by the system message logs.
Description
System unusable
Immediate action required
Critical condition
Error conditions
Warning conditions
Normal bug significant condition
Informational messages
Debugging messages
describes the elements of syslog messages.
Description
Date and time of the error or event. This information appears only if
configured using the set logging timestamp enable command.
Indicates the facility to which the message refers (for example, SNMP, SYS,
etc.).
Single-digit code from 0 to 7 that indicates the severity of the message.
Text string that uniquely describes the error message.
Text string containing detailed information about the event being reported.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
) and can contain up to 80 characters. Messages are
%
System Log Message Format
27-3