Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 750

Configuring QoS
Creating or Modifying the Default IPX and MAC ACLs
To create or modify the default IPX or MAC ACL, perform this task in privileged mode:
Task
Step 1 Modify the default IPX or MAC ACL.
Step 2
Verify the configuration.
For more information, see the
This example shows how to modify the default IPX ACL:
Console> (enable) set qos acl default-action ipx dscp 5 aggregate my-agg
QoS default-action for IPX ACL is set successfully.
Console> (enable)
IPX and MAC ACLs do not support microflow policing rules.
Note
Deleting Named ACLs
To delete a named ACL, perform this task in privileged mode:
Task
Step 1 Delete a named ACL.
Step 2 Verify the configuration.
This example shows how to delete the ACL named icmp_acl:
Console> (enable) clear qos acl icmp_acl 1
ACL icmp_acl ACE# 1 is deleted.
icmp_acl editbuffer modified. Use 'commit' command to apply changes.
Console> (enable)
Reverting to Default Values in Default ACLs
To revert to the default values for a default ACL, perform this task in privileged mode:
Task
Step 1
Revert to the default values for a default ACL.
Step 2
Verify the configuration.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
41-44
Command
With PFC:
set qos acl default-action {ipx | mac} {dscp
dscp | trust-cos} [aggregate aggregate_name]
With PFC2:
set qos acl default-action {ipx | mac} aggregate
aggregate_name
show qos acl info default-action {ip | ipx | mac |
all}
"Default ACLs" section on page
Command
clear qos acl acl_name [editbuffer_index]
show qos acl info {acl_name | all}
Command
clear qos acl default-action {ip | ipx | mac}
show qos acl info default-action {ip | ipx | mac |
all}
Chapter 41 Configuring QoS
41-20.
78-13315-02