Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 280

Configuring MLS
Monitoring IP MMLS on the MSFC
The show mls ip multicast command displays detailed information about IP MMLS.
To display detailed IP MMLS information on the MSFC, perform one of these tasks:
Task
Display IP MMLS group information.
Display IP MMLS details for all
interfaces.
Display a summary of IP MMLS
information.
Display IP MMLS statistics.
Display IP MMLS source information.
This example shows how to display IP MMLS statistics on the MSFC:
Router# show mls ip multicast statistics
MLS Multicast configuration and state:
MLS Multicast statistics:
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
14-32
Router Mac:0050.0f2d.9bfd, Router IP:1.12.123.234
MLS multicast operating
Maximum number of allowed outstanding messages:1
Maximum size reached from feQ:1
Feature Notification sent:5
Feature Notification Ack received:4
Unsolicited Feature Notification received:0
MSM sent:33
MSM ACK received:33
Delete notifications received:1
Flow Statistics messages received:248
Flow install Ack:9
Flow install Nack:0
Flow update Ack:2
Flow update Nack:0
Flow delete Ack:0
Complete flow install Ack:10
Complete flow install Nack:0
Complete flow delete Ack:1
Input VLAN delete Ack:4
Output VLAN delete Ack:0
Group delete sent:0
Group delete Ack:0
Global delete sent:7
Global delete Ack:7
L2 entry not found error:0
Generic error :3
LTL entry not found error:0
MET entry not found error:0
L3 entry exists error :0
Hash collision error :0
L3 entry not found error:0
Complete flow exists error :0
Command
Router# show mls ip multicast group group-address
[interface type number | statistics]
Router# show mls ip multicast interface type number
[statistics | summary]
Router# show mls ip multicast summary
Router# show mls ip multicast statistics
Router# show mls ip multicast source ip-address
[interface type number | statistics]
state:ACTIVE
Chapter 14 Configuring MLS
78-13315-02