Enabling Gmrp Forward-All Option; Disabling Gmrp Forward-All Option - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Chapter 40
Configuring Multicast Services
Task
Step 1
Disable GMRP on individual switch ports.
Step 2
Verify the configuration.
This example shows how to disable GMRP on ports 6/10–14 and verify the configuration:
Console> (enable) set port gmrp disable 6/10-14
GMRP disabled on ports 6/10-14.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
Port
-------------------------------------------- ----------- ------------ ----------
1/1-2,3/1,6/1-9,6/15-48,7/1-24
6/10-14
Console> (enable)

Enabling GMRP Forward-All Option

When you enable the GMRP forward-all option on a port, a copy of all multicast traffic registered on the
switch is forwarded to that port. Enable the forward-all option on any port connected to a router that
needs to receive any multicasts (routers do not support GMRP and so cannot send GMRP join mesages).
The forward-all option can also be used to forward all registered multicast traffic to a port with a network
analyzer or probe attached.
To enable the GMRP forward-all option on a switch port, perform this task in privileged mode:
Task
Enable the GMRP forward-all option on a switch
port.
This example shows how to enable the GMRP forward-all option on port 1/1:
Console> (enable) set gmrp fwdall enable 1/1
GMRP Forward All groups option enabled on port 1/1.
Console> (enable)

Disabling GMRP Forward-All Option

To disable the GMRP forward-all option on a port, perform this task in privileged mode:
Task
Disable the GMRP forward-all option on a port.
78-13315-02
Command
set port gmrp disable mod/port
show gmrp configuration
GMRP Status Registration ForwardAll
Enabled
Disabled
Command
set gmrp fwdall enable mod/port
Command
set gmrp fwdall disable mod/port
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring GMRP
Normal
Disabled
Normal
Disabled
40-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents