Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 550

Downloading Software Images to the Switch With TFTP
Saving NVRAM .................
Testing NVRAM ................Passed
Restoring NVRAM...............
Level2 Cache ..................Present
Level2 Cache test..............Passed
Leaving power_on_diags
Cafe Daughter Present.
EOBC link up
Boot image: bootflash:cat6000-sup.5-2-1-CSX.bin
Flash Size = 0X1000000, num_flash_sectors = 64
readCafe2Version: 0x00000001
RIn Local Test Mode, Pinnacle Synch Retries: 2
Running System Diagnostics from this Supervisor (Module 1)
This may take up to 2 minutes....please wait
Cisco Systems Console
Enter password:
07/21/1998,13:52:51:SYS-5:Module 1 is online
07/21/1998,13:53:11:SYS-5:Module 4 is online
07/21/1998,13:53:11:SYS-5:Module 5 is online
07/21/1998,13:53:14:PAGP-5:Port 1/1 joined bridge port 1/1.
07/21/1998,13:53:14:PAGP-5:Port 1/2 joined bridge port 1/2.
07/21/1998,13:53:40:SYS-5:Module 2 is online
07/21/1998,13:53:45:SYS-5:Module 3 is online
Console>
Single Module Image TFTP Download Example
For a step-by-step procedure for downloading software images to intelligent modules, see the
Note
"Downloading Switching Module Images Using TFTP" section on page
This example shows a complete TFTP download procedure of an ATM software image to a single ATM
module:
Console> (enable) show version 4
Mod Port Model
--- ---- ---------- --------- ----------------------------------------
4
Console> (enable) copy tftp 4/flash
IP address or name of remote host []? 172.20.52.3
Name of file to copy from []? cat6000-atm.3-2-7.bin
Download image tftp:cat6000-atm.3-2-7.bin to Module 4 FLASH (y/n) [n]? y
This command will reset Download Module(s) you selected.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
25-6
Serial #
1 WS-X6101 003414855 Hw : 1.2
Chapter 25
Versions
Fw : 1.3
Sw : 3.2(6)
Working with System Software Images
25-4.
78-13315-02