Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 838

Configuring VoIP on a Switch
To configure port voice interface for DHCP, TFTP, and DNS servers, perform this task in privileged
mode:
Task
Configure port voice interface for DHCP, TFTP,
and DNS servers.
These examples shows how to configure the port voice interface for DHCP, TFTP, and DNS servers:
Console> (enable) set port voice interface 7/1 dhcp enable
Port 7/1 DHCP enabled.
Console> (enable) set port voice interface 7/3 dhcp disable 171.68.111.41/24 tftp
173.32.43.11 dns 172.20.34.204 cisco.com
Port 7/3 dhcp disabled.
System DNS configurations applied.
Console> (enable) set port voice interface 7/4-6 dhcp enable vlan 3
Vlan 3 configuration successful
Ports 7/4-6 DHCP enabled.
Console> (enable)
Displaying Port Voice Interface
To display the port voice interface configuration, perform this task in privileged mode:
Task
Display the port voice interface configuration.
This example shows how to display the port voice interface configuration (this display is from the
24-port FXS analog interface module):
Console> show port voice interface 5
Port
-------- ------- ----------------- --------------- ---------------
5/1-24
Port
-------- ----------------- --------------- --------------- ---------------
5/1-24
Port
-------- ----------------- -------------------------------------------------
5/1-24
(*): Primary
Console> (enable)
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
44-22
DHCP MAC-Address
disable 00-10-7b-00-13-ea 10.6.15.158
Call-Manager(s) DHCP-Server
10.6.15.155 -
DNS-Server(s) Domain
12.2.2.1* cisco.cisco.com
7.7.7.7
Command
set port voice interface mod/port dhcp enable
[vlan vlan]
set port voice interface mod/port dhcp disable
{ipaddrspec} {tftp ipaddr} [vlan vlan]
[gateway ipaddr] [dns [ipaddr] [domain_name]]
Command
show port voice interface [mod[/port]]
IP-Address Subnet-Mask
255.255.255.0
TFTP-Server
10.6.15.155
Chapter 44 Configuring a VoIP Network
Gateway
-
78-13315-02