Displaying Active Call Information - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 44 Configuring a VoIP Network
3/5
3/6
3/7
3/8
3/9
3/10
3/11
3/12
3/13
3/14
3/15
3/16
3/17
3/18
3/19
3/20
3/21
3/22
3/23
3/24
Port
-------- ------- ----------------- --------------- ---------------
3/1-24
Port
-------- ----------------- --------------- --------------- ---------------
3/1-24
Port
-------- ----------------- -------------------------------------------------
3/1-24
Port
-------- ---------------- --------
3/1-24
Port
-------- ------------- --------- ------------- ---------------
3/1-24
Port
-------- -------- --------- -------------- --------- --------------
3/1-24
(*): Primary
Console> (enable)

Displaying Active Call Information

Enter the show port voice active command to display active call information on a port. There are up to
8 calls per port for the 8-port T1/E1 PSTN interface module but only one call per port for the 24-port
FXS analog station interface module.
78-13315-02
onhook
onhook
onhook
offhook
offhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
onhook
DHCP MAC-Address
enable 00-10-7b-00-13-e4 172.20.34.50
Call-Manager(s) DHCP-Server
172.20.34.207 172.20.34.207
DNS-Server(s) Domain
172.20.34.207* cisco.com
172.34.23.111
CallManagerState DSP-Type
registered C549
ToneLocal Impedance InputGain(dB) OutputAtten(dB)
northamerica 0
RingFreq Timing Timing
(Hz) Digit(ms) InterDigit(ms) Pulse(ms) PulseDigit(ms)
20 100 100
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
1 full
IP-Address Subnet-Mask
255.255.255.0
TFTP-Sever
172.20.34.207
0 0
Timing Timing
0 0
Configuring VoIP on a Switch
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
64k FXS
Gateway
-
44-27