Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 704

Configuring RGMP
Task
Display the RGMP statistics for a specified
VLAN.
This example shows how to display RGMP statistics:
Console> (enable) show rgmp statistics 23
RGMP enabled
RGMP Statistics for vlan <23>:
Receive:
Valid pkts:20
Hellos:10
Joins:5
Leaves:5
Byes:0
Discarded:0
Transmit:
Total Pkts:10
Failures:0
Hellos:10
Joins:0
Leaves:0
Byes:0
Console> (enable)
Displaying Ports Connected to RGMP-Capable Routers
This command displays detected RGMP-capable router ports. A "+" in front of the port indicates that it
is an RGMP-capable router.
To display RGMP-capable router ports, perform this task in privileged mode:
Task
Display RGMP-capable router ports.
This example shows how to display ports connected to RGMP-capable routers:
Console> (enable) show multicast router
Port
------ ------
5/1 +
5/14 + 2
5/15
Total Number of Entries = 3
'*' - Configured
'+' - RGMP-capable
Console> (enable)
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
40-24
Vlan
1
1
Chapter 40 Configuring Multicast Services
Command
show rgmp statistics [vlan]
Command
show multicast router [igmp | rgmp] [mod/port]
[vlan_id]
78-13315-02