Chapter 43
Configuring the Switch Fabric Modules
Multilayer Switch Feature Card (MSFC) version on active and standby supervisor engine
•
System contact
•
After the LCD banner content is modified, this information is sent to the Switch Fabric Modules installed
in the chassis and displayed in the LCDs.
To modify the LCD banner content, perform this task in privileged mode:
Task
Step 1
Modify the LCD banner content.
Step 2
Verify the LCD bannder change.
This example shows how to modify the LCD banner for the Switch Fabric Module:
Console> (enable) set banner lcd &HelloWorld!&
LCD banner set
Console> (enable) show banner
MOTD banner:
LCD config:
Hello
World!
78-13315-02
Configuring and Monitoring the Switch Fabric Module
Command
set banner lcd c [text] c
show banner
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
43-9