Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 627

Chapter 34 Configuring the IP Permit List
To clear an IP permit list entry, perform this task in privileged mode:
Task
Step 1
Disable the IP permit list.
Step 2
Specify the IP address to remove from the IP
permit list.
Step 3
Verify the IP permit list configuration.
This example shows how to clear an IP permit list entry:
Console> (enable) set ip permit disable all
Console> (enable) clear ip permit 172.100.101.102
172.100.101.102 cleared from IP permit list.
Console> (enable) clear ip permit 172.160.161.0 255.255.192.0 snmp
172.160.128.0 with mask 255.255.192.0 cleared from snmp permit list.
Console> (enable) clear ip permit 172.100.101.102 telnet
172.100.101.102 cleared from telnet permit list.
Console> (enable) clear ip permit all
IP permit list cleared.
Console> (enable)
78-13315-02
Command
set ip permit disable [telnet | snmp | ssh]
clear ip permit {ip_address [mask] | all} [telnet |
snmp | ssh]
show ip permit
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring the IP Permit List
34-5