Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 464

Configuring Authorization
Task
Step 3
Disable authorization of configuration
commands. Enter the console or telnet keyword if
you want to disable authorization only for console
port or Telnet connection attempts. Enter the both
keyword to disable authorization for both console
port and Telnet connection attempts.
Step 4 Verify the TACACS+ authorization configuration. show authorization
This example shows how to disable TACACS+ EXEC mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization exec disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable TACACS+ enable mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization enable disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable TACACS+ command authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization commands disable both
Successfully disabled commands authorization.
Console> (enable)
This example shows how to verify the configuration:
Console> (enable) show authorization
Telnet:
-------
exec:
enable:
commands:
config:
all:
Console:
--------
exec:
enable:
commands:
config:
all:
Console> (enable)
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
21-54
Primary Fallback
------- --------
tacacs+ deny
tacacs+ deny
tacacs+ deny
- -
Primary Fallback
------- --------
tacacs+ deny
tacacs+ deny
tacacs+ deny
- -
Chapter 21 Configuring Switch Access Using AAA
Command
set authorization commands disable [console |
telnet | both]
78-13315-02