Disabling Udld On Individual Ports; Disabling Udld Globally; Specifying The Udld Message Interval - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Configuring UDLD

Disabling UDLD on Individual Ports

To disable UDLD on individual ports, perform this task in privileged mode:
Task
Step 1 Disable UDLD on a specific port.
Step 2
Verify the configuration.
This example shows how to disable UDLD on port 4/1:
Console> (enable) set udld disable 4/1
UDLD disabled on port 4/1.
Console> (enable)

Disabling UDLD Globally

To disable UDLD globally on the switch, perform this task in privileged mode:
Task
Step 1 Disable UDLD globally on the switch.
Step 2
Verify the configuration.
This example shows how to disable UDLD globally on the switch:
Console> (enable) set udld disable
UDLD disabled globally
Console> (enable)

Specifying the UDLD Message Interval

To specify the UDLD message interval, perform this task in privileged mode:
Task
Step 1 Specify the UDLD message interval.
Step 2 Verify the configuration.
This example shows how to specify the UDLD message interval on the switch:
Console> (enable) set udld interval 20
UDLD message interval set to 20 seconds
Console> (enable)
This example shows how to verify the message interval on the switch:
Console> (enable) show udld
UDLD
Message Interval
Console> (enable)
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
30-4
: enabled
: 20 seconds
Chapter 30
Command
set udld disable mod/port
show udld port [mod[/port]]
Command
set udld disable
show udld
Command
set udld interval interval
show udld
Configuring UDLD
78-13315-02