Monitoring User Sessions - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Monitoring User Sessions

The nbits value specifies the RSA key size. The valid key size range is 512 to 2048 bits. A key size with a
larger number provides higher security but takes longer to generate.
You can enter the optional force keyword to regenerate the keys and suppress the warning prompt of
overwriting existing keys.
Monitoring User Sessions
You can display the currently active user sessions on the switch using the show users command. The
command output displays all active console port and Telnet sessions on the switch.
To display the active user sessions on the switch, perform this task in privileged mode:
Task
Display the currently active user sessions on the
switch.
This example shows the output of the show users command when local authentication is enabled for
console and Telnet sessions (the asterisk [*] indicates the current session):
Console> (enable) show users
Session
-------- ---------------- -------------------------
console
telnet
* telnet
Console> (enable)
This example shows the output of the show users command when TACACS+ authentication is enabled
for console and Telnet sessions:
Console> (enable) show users
Session
-------- ---------------- -------------------------
console
telnet
telnet
* telnet
Console> (enable)
This example shows how to display information about user sessions using the noalias keyword to
display the IP addresses of connected hosts:
Console> (enable) show users noalias
Session
-------- ---------------- -------------------------
console
telnet
* telnet
Console> (enable)
To disconnect an active user session, perform this task in privileged mode:
Task
Disconnect an active user session on the switch.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
19-6
User Location
sam-pc.bigcorp.com
jake-mac.bigcorp.com
User Location
sam
jake jake-mac.bigcorp.com
tim tim-nt.bigcorp.com
suzy suzy-pc.bigcorp.com
User Location
10.10.10.12
10.10.20.46
Chapter 19 Checking Port Status and Connectivity
Command
show users [noalias]
Command
disconnect {console | ip_addr}
78-13315-02