Updating The Server; Suppressing Accounting; Configuring Accounting; Accounting Default Configuration - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 21 Configuring Switch Access Using AAA

Updating the Server

You can configure the switch to send accounting information to the TACACS+ server. There are two
options:
•
•

Suppressing Accounting

You can configure the system to suppress accounting when an unknown user with no username accesses
the switch by using the set accounting suppress null-username enable command.
RADIUS and TACACS+ accounting are the same, except that RADIUS does not do command
Note
accounting, periodic updates, or allow null-username suppression.

Configuring Accounting

These sections describe how to configure accounting for both TACACS+ and RADIUS:
•
•
•

Accounting Default Configuration

Table 21-5
Table 21-5 Accounting Default Configuration
Feature
Accounting
Accounting events (exec, system, commands, and connect)
Accounting records
78-13315-02
Newinfo—Sends accounting information to the server only when new accounting information
becomes available.
Periodic—Sends accounting update records at regular intervals. This option could be used to keep
up-to-date connection and session information even if the NAS restarts and loses the initial start
time. You must set a time lapse between periodic updates. Valid intervals are from 1 to
71,582 minutes.
Accounting Default Configuration, page 21-59
Accounting Configuration Guidelines, page 21-60
Configuring Accounting, page 21-60
shows the accounting default configuration.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring Accounting
Default Value
Disabled
Disabled
Stop-only
21-59