Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 333

Chapter 16 Configuring Access Control
Clearing the Edit Buffer
You can clear changes made to the ACL edit buffer since its last save with the rollback command. The
ACL is rolled back to its state at the last commit command.
To clear the ACL edit buffer, perform this task in privileged mode:
Task
Clear the ACL edit buffer.
This example shows how to clear the edit buffer of a specific security ACL:
Console> (enable) rollback security acl IPACL1
Editbuffer for 'IPACL1' rolled back to last commit state.
Console> (enable)
Removing ACEs from Security ACLs
You can remove a specific ACE or all ACEs from an ACL with the clear security acl command. This
command deletes the ACEs from the edit buffer.
To remove an ACE from a security ACL, perform this task in privileged mode:
Task
Remove an ACE from a security ACL. clear security acl all
This example shows how to remove ACEs from all the ACLs:
Console> (enable) clear security acl all
All editbuffers modified. Use 'commit' command to apply changes.
Console> (enable)
This example shows how to remove a specific ACE from a specific ACL:
Console> (enable) clear security acl IPACL1 2
IPACL1 editbuffer modified. Use 'commit' command to apply changes.
Console> (enable)
Clearing the Security ACL Map
You can remove a VACL-to-VLAN mapping with the clear security acl map command.
To clear the security ACL map, perform this task in privileged mode:
Task
Clear the security ACL map.
78-13315-02
Command
rollback security acl {acl_name | all | adjacency}
Command
clear security acl acl_name
clear security acl acl_name editbuffer_index
Command
clear security acl map all
clear security acl map acl_name
clear security acl map vlan
clear security acl map acl_name vlan
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring VACLs
16-37