Setting The Garp Timers - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 40 Configuring Multicast Services
Console> (enable) set gmrp registration fixed 2/10
GMRP Registration is set fixed on port 2/10.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
GMRP-Status Registration ForwardAll Port(s)
----------- ------------ ---------- --------------------------------------------
Enabled
Enabled
Console> (enable)
Setting Forbidden Registration
Setting a port in forbidden registration mode deregisters all GMRP multicasts and prevents any further
GMRP multicast registration on the port.
To set forbidden registration on a port, perform this task in privileged mode:
Task
Step 1 Set forbidden registration on a port.
Step 2 Verify the configuration.
This example shows how to set forbidden registration on port 2/10 and verify the configuration:
Console> (enable) set gmrp registration forbidden 2/10
GMRP Registration is set forbidden on port 2/10.
Console> (enable) show gmrp configuration
Global GMRP Configuration:
GMRP Feature is currently enabled on this switch.
GMRP Timers (milliseconds):
Join = 200
Leave = 600
LeaveAll = 10000
Port based GMRP Configuration:
GMRP-Status Registration ForwardAll Port(s)
----------- ------------ ---------- --------------------------------------------
Enabled
Enabled
Console> (enable)

Setting the GARP Timers

The commands set gmrp timer and show gmrp timer are aliases for set garp timer and show garp
Note
timer. The aliases may be used if desired.
78-13315-02
Normal Disabled
Fixed Disabled
Normal Disabled
Forbidden Disabled
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
1/1-4
2/1-9,2/11-48
3/1-24
5/1
2/10
Command
set gmrp registration forbidden mod/port
show gmrp configuration
1/1-4
2/1-9,2/11-48
3/1-24
5/1
2/10
Configuring GMRP
40-17