Disabling Vtp (Vtp Transparent Mode) - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Chapter 10 Configuring VTP
To configure the switch as a VTP client, perform this task in privileged mode:
Task
Step 1
Define the VTP domain name.
Step 2
Place the switch in VTP client mode.
Step 3 Verify the VTP configuration.
This example shows how to configure the switch as a VTP client and verify the configuration:
Console> (enable) set vtp domain Lab_Network
VTP domain Lab_Network modified
Console> (enable) set vtp mode client
VTP domain Lab_Network modified
Console> (enable) show vtp domain
Domain Name
-------------------------------- ------------ ----------- ----------- ----------
Lab_Network
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
10
Last Updater
--------------- -------- -------- -------------------------
172.20.52.70
Console> (enable)

Disabling VTP (VTP Transparent Mode)

When you configure the switch as VTP transparent, you disable VTP on the switch. A VTP transparent
switch does not send VTP updates and does not act on VTP updates received from other switches.
However, a VTP transparent switch running VTP version 2 does forward received VTP advertisements
out all of its trunk links.
Network devices in VTP transparent mode do not send VTP Join messages. On Catalyst 6000 family
Note
switches with trunk connections to network devices in VTP transparent mode, configure the VLANs that
are used by the transparent-mode network devices or that need to be carried across trunks as pruning
ineligible (use the clear vtp pruneeligible command).
To disable VTP on the switch, perform this task in privileged mode:
Task
Step 1 Disable VTP on the switch by configuring it for
VTP transparent mode.
Step 2 Verify the VTP configuration.
78-13315-02
Domain Index VTP Version Local Mode
1
1023 40
V2 Mode Pruning
disabled disabled 2-1000
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Command
set vtp domain name
set vtp mode client
show vtp domain
2
enabled
PruneEligible on Vlans
Command
set vtp mode transparent
show vtp domain
Configuring VTP
Password
client -
10-7