Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 748

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Configuring QoS
This example shows how to create an IP ACE:
Console> (enable) set qos acl ip my_IPacl trust-ipprec microflow my-micro aggregate my-agg
any
my_IPacl editbuffer modified. Use 'commit' command to apply changes.
Console> (enable)
Modifying the Default IP ACL
To modify the default IP ACL, perform this task in privileged mode:
Task
Step 1
Modify the default IP ACL.
Step 2
Verify the configuration.
For more information, see the
This example shows how to modify the default IP ACL:
Console> (enable) set qos acl default-action ip dscp 5 microflow my-micro aggregate my-agg
QoS default-action for IP ACL is set successfully.
Console> (enable)
Creating or Modifying Named IPX ACLs
To create or modify a named IPX ACL, perform this task in privileged mode:
Task
Step 1
Create or modify an IPX ACL.
Step 2
Verify the configuration.
The protocol parameter can be specified numerically (0–255) or with these keywords: any, ncp (17),
netbios (20), rip (1), sap (4), or spx (5).
The src_net and dest_net parameters are IPX network numbers, entered as up to 8 hexadecimal digits in
the range 1 to FFFFFFFE (-1 matches any network number). You do not need to enter leading zeros.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
41-42
Command
set qos acl default-action ip {dscp dscp |
trust-cos | trust-ipprec | trust-dscp} [microflow
microflow_name] [aggregate aggregate_name]
show qos acl info default-action {ip | ipx | mac |
all}
"Default ACLs" section on page
Command
With PFC:
set qos acl ipx acl_name {dscp dscp | trust-cos}
[aggregate aggregate_name] protocol src_net
[dest_net[.dest_node] [[dest_net_mask].dest_node_
mask]] [before editbuffer_index | modify
editbuffer_index]
With PFC2:
set qos acl ipx acl_name aggregate
aggregate_name protocol src_net
[dest_net[.dest_node] [[dest_net_mask].dest_node_
mask]] [before editbuffer_index | modify
editbuffer_index]
show qos acl info {acl_name | all}
editbuffer [editbuffer_index]
Chapter 41
Configuring QoS
41-20.
78-13315-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents