Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 746

Configuring QoS
IP ACEs for ICMP Traffic
To create or modify an IP ACE for ICMP traffic, perform this task in privileged mode:
Task
Step 1 Create or modify an IP ACE for ICMP traffic.
Step 2 Verify the configuration.
For icmp_code and icmp_type parameter keyword options, see the
Criteria" section on page
This example shows how to create an IP ACE for ICMP echo traffic:
Console> (enable) set qos acl ip my_IPacl trust-ipprec microflow my-micro aggregate my-agg
icmp any any echo
my_IPacl editbuffer modified. Use 'commit' command to apply changes.
Console> (enable)
IP ACEs for IGMP Traffic
Note QoS does not support IGMP traffic when IGMP snooping is enabled.
To create or modify an IP ACE for IGMP traffic, perform this task in privileged mode:
Task
Step 1 Create or modify an IP ACE for IGMP traffic.
Step 2 Verify the configuration.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
41-40
41-18.
Chapter 41
Command
set qos acl ip acl_name {dscp dscp | trust-cos |
trust-ipprec | trust-dscp} [microflow
microflow_name] [aggregate aggregate_name]
icmp src_ip_spec dest_ip_spec
[icmp_type [icmp_code] | icmp_message]
[precedence precedence | dscp-field dscp]
[before editbuffer_index | modify
editbuffer_index]
show qos acl info {acl_name | all}
editbuffer [editbuffer_index]
"IP ACE Layer 4 ICMP Classification
Command
set qos acl ip acl_name {dscp dscp | trust-cos |
trust-ipprec | trust-dscp} [microflow
microflow_name] [aggregate aggregate_name]
igmp src_ip_spec dest_ip_spec [igmp_type]
[precedence precedence | dscp-field dscp]
[before editbuffer_index | modify
editbuffer_index]
show qos acl info {acl_name | all}
editbuffer [editbuffer_index]
Configuring QoS
78-13315-02