Spectra Logic T-Series Spectra T50e User Manual page 171

Configure Encryption
Encryption Settings for a Multiple Users
Figure 139 The Encryption Settings for Multi-Users screen.
3. Select the initialization mode you want to use:
Standard Mode – When the library is powered on during startup,
data can be backed up to partitions that support encryption without
entering an encryption password. To use Standard Mode, make sure
that Enable Secure Initialization is not selected.
Secure Initialization Mode – When the library is powered on
during startup, partitions dedicated to encryption are not available,
so backups sent to them cannot run. To initialize the encryption
partitions, someone must log in as a superuser, then enter the
encryption password. To use Secure Initialization Mode, select
Enable Secure Initialization.
171
Spectra T50e library
December 2008