Connect The Library To An Ethernet Network - Spectra Logic T-Series Spectra T50e User Manual

C
ONNECT THE
If you want to use the BlueScale user interface to manage and monitor the
library remotely using a web browser, connect a cable to the Ethernet port
on the library's LCM
if the library will automatically email notifications to users and
AutoSupport tickets to SpectraGuard Support.
Figure 21 Connect an Ethernet cable to the LCM.
A Category 5 (10/100BaseT connection) data-grade Ethernet cable that is
compliant with EIA/TIA 568 is required to connect to the library.
December 2008
L
IBRARY TO AN
(Figure
Ethernet cable

Connect the Library to an Ethernet Network

E N
THERNET ETWORK
21). This Ethernet connection is also required
Spectra T50e library
49