Spectra Logic T-Series Spectra T50e User Manual page 124

Chapter 6 — Partition Management
Editing Slots and Tape Drives
To edit slots and tape drives:
1. From the Exporter screen, select Next. The Chambers & Drives screen
2. Use the – and + to edit the number of storage slots. If the library has:
3. Select Next.
124
User Guide
appears (Figure 97). The line at the top of the screen describes how
many total slots are available to assign to the partition.
Figure 95 The Chambers & Drives screen (one partition).
one tape drive installed—it is automatically assigned to the
partition and as the exporter.
two tape drives installed—you can choose which tape drive to
assign as the exporter.
Note: If this is your last or your only partition, be sure to use up all
available slots and tape drives.
If the Partition Users screen appears
Specifying Partition Users on page
If the Encryption screen appears
the option of configuring encryption for the partition or selecting
Next to navigate to the Partition Users screen.
(Figure 98), proceed to
126.
(Figure 96 or Figure 97), you have
90970015