User Security - Spectra Logic T-Series Spectra T50e User Manual

Remote Library Controller
The LC can be displayed and operated remotely in any supported web
browser; this remote interface is called the Remote Library Controller
(RLC).
The RLC gives you access the same features and functions that are
available through the LC, excluding only the functions that involve the
direct use of the physical library (for example, the use of the access port).

User Security

Library users are configured for the library in one of three groups:
superuser, administrator, or operator. For descriptions of the security
privileges assigned to each group, see
AutoSupport
AutoSupport helps manage problems you may experience with the library.
It guides you through the process of sending e-mail regarding library
problems—along with library logs and configuration information—
directly to Technical Support. AutoSupport Level One is included with
your library purchase; you can purchase AutoSupport Level Two as
needed. See
Online Access to Spectra Logic
When the library is set up with access to the Internet, the bottom portion of
the RLC displays technical tips, allows one-click access to Spectra Logic's
Knowledge Base, streamlines the online ordering of media and capacity,
and more. Online access can be enabled or disabled during any browser
session; it does not affect AutoSupport. See Online Access to Spectra Logic
in
December 2008
You can run no more than two simultaneous RLC sessions
AutoSupport on page
Library Settings on page
Configure Library Users on page
133.
81.
Spectra T50e library
Library Management
73.
21