Spectra Logic T-Series Spectra T50e User Manual page 83

Setting the Static IP Address
Follow these steps to set a static IP address:
1. Log in as a user in either the superuser or administrator group.
2. Select Configuration > Network. The Network screen appears.
3. Select Change to Static IP. The Network screen refreshes for the new
4. Select Save.
Once you select Save, your changes should take effect immediately; no
restart is required. To verify the change, connect the library at the IP
address you set using a web browser.
December 2008
Figure 52 The Network DHCP screen.
information to be entered
Figure 53 The Network Static IP screen.
Enter the:
static address in the Address field (format = nnn.nnn.nnn.nnn)
subnet mask in the Subnet field (format = nnn.nnn.nnn.nnn)
network gateway in the Gateway field (format = nnn.nnn.nnn.nnn)
(Figure 53).
Spectra T50e library
Library Settings
83