Continuing Library Operations While Using A Usb Device; Connecting A Usb Storage Device To The Lcm - Spectra Logic T-Series Spectra T50e User Manual

Item
Encryption import
Note: If you are unable to access a USB storage device connected to the library, remove it and use a
different one. Not all USB storage devices are compatible with the library.

Continuing Library Operations While Using a USB Device

It is safe/not safe...
Safe
Not Safe
Do
Caution
firmware. Updated components automatically reset (including a library reset)
when updates are complete, which could interrupt a backup operation.

Connecting a USB Storage Device to the LCM

1. Access the LCM at the back of the library.
December 2008
Description
Importing a previously exported BlueScale encryption key
to continue library operations, such as data backup, while...
exporting or importing a BlueScale encryption key using a USB storage device
running traces (trace results are the data most often saved to a USB storage
device)
saving library configurations and other information to a USB storage device
the library is performing a firmware update using a firmware package
previously copied to the library
restoring a saved library configuration and other information from a USB
storage device
not
run backups while the library is
Note:
Plug the USB storage device into the LCM before beginning a
procedure that reads or writes data to allow time for device
recognition.
Do not leave a USB storage device plugged into the LCM
indefinitely, unless directed to do so by SpectraGuard Support.
Use a USB Storage Device
performing
updates from downloaded
Spectra T50e library
69