Spectra Logic T-Series Spectra T50e User Manual page 196

Chapter 10 — Library Troubleshooting
1. If you plan to restore using the zip file containing the auto-save file that
2. Log into the library with superuser or administrator privileges.
3. Select Maintenance > Utilities. The Utilities screen displays.
4. Select Show Advanced. The Advanced Utilities Confirmation screen
5. Select Yes. The Utilities screen refreshes to show a list of the advanced
6. Scroll through the list of advanced utilities and select Restore Library
7. Select Next.
8. Use the Select a configuration time stamp drop-down list to choose the
9. Select Run.
196
User Guide
was sent as an email attachment, follow these steps to copy it to a USB
key; otherwise, skip to Step 2.
a. Create a folder called
b. Copy the zip file you received in the email to the
folder on the USB key.
c. Connect the USB key to the USB port on the LCM before continuing.
displays.
utilities.
Configuration from Auto Save > Select. A description screen displays.
Figure 162 The Restore Library Configuration from Auto Save
utility.
auto-save file you want to use. The auto-save files are named
<date-time>cfg.zip
the file was created.
Unless you have replaced the LCM or its compact flash, the first file
listed (
\hard disk\lc\autocfgsave
on the LCM compact flash.
Note: If available, the auto-save zip file stored on the LCM compact
flash always contains the most recently saved library
configuration information and MLM database.
After a brief delay, the Utility Results screen appears, showing that the
configuration was restored.
on a USB key.
\autocfgsave
, where
<date-time>
) is the auto-save zip file stored
\autocfgsave
is the time stamp for when
90970015