Spectra Logic T-Series Spectra T50e User Manual page 89

You can optionally store the library's configuration, either by saving it to a
USB key or by emailing it to one of the library's configured mail users. If
you choose either of these option, verify the backup as described in the
following sections.
Manually Backing up the Library Configuration
You can store the library's configuration, either by saving it to a USB
storage device or by e-mailing it to one of the library's configured mail
users.
Having a backup of the library's configuration is extremely useful if
problems require you to replace the LCM or the LCM's flash card. After the
replacement procedure is complete, you can use the saved configuration to
restore the library's settings, including the partitions, instead of having to
manually re-enter all of the information.
Follow these steps to save the library's configuration:
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Utilities. The Utilities screen displays.
3. Select Show Advanced. The library displays this message:
4. Select Yes. The Utilities screen refreshes to show a list of the advanced
December 2008
Restoring From an Auto-Save Configuration File on page 195
Note:
The Save Library Configuration utility described in this section
does not back up the MLM database. To back up the MLM
database, use the Save MLM Database utility, as described in
Back Up the MLM Database on page
WARNING: Advanced utilities may alter the configuration of your
library or otherwise adversely affect library operation.
Are you sure you want to display the advanced utilities?
utilities (Figure 59).
Figure 59 The advanced Utilities screen.
Back Up the Library Configuration
159.
Spectra T50e library
89