Powering Off The Library; Resetting The Library - Spectra Logic T-Series Spectra T50e User Manual

Chapter 3 — Library Operation

Powering Off the Library

To power off the library, press and hold the front panel power button for
one second. The power-off sequence takes approximately two minutes
while the library allows applications to shut down gracefully.

Resetting the Library

During some types of troubleshooting operations and when you make
changes to certain library configuration settings (for example, the web server
port) you must restart (reboot) the library before the changes take effect.
Do not restart the library unless you are specifically instructed to do so by Spectra
Caution
Logic Technical Support or directed to do so in this manual. Trace data generated
by the library may be lost when you restart the library or a component, making
diagnosing problems difficult.
Follow these steps to restart the library.
1. Power off – Press the front panel power button (see
2. Once the library has powered off, wait at least 10 seconds.
3. Power on – press the front panel power button for one second or until
56
User Guide
If the system is stable at power off, a message displays indicating that
the power button was pressed.
If the system is unstable at power off—if you power off the library
when it is in an error state—the power off time will take approximately
one minute and will show no indication that it is powering off. Wait for
the sequence to complete.
If the library does not power off after two minutes, press and hold the
front panel power button for ten seconds to invoke the emergency power off
process.
second. The power-off sequence takes approximately two minutes
while the library allows applications to shut down gracefully.
If the system is stable at power off, a message displays indicating
that the power button was pressed.
If the system is unstable at power off—if you power off the library
when it is in an error state—the power off time will take
approximately one minute and will show no indication that it is
powering off. Wait for the sequence to complete.
If the library does not power off after two minutes, press and hold
the front panel power button for ten seconds to invoke the emergency
power off process.
the button's LED illuminates. Wait while the library completes its
power-on sequence, which takes six to seven minutes.
Figure 28) for one
90970015