Use A Usb Storage Device - Spectra Logic T-Series Spectra T50e User Manual

Chapter 3 — Library Operation
Viewing Storage Density
The Storage Density metric allows you to monitor the amount of data your
library is capable of storing in its current configuration.
Follow these steps to view the storage density data for the library.
1. Select General > Metrics from the toolbar menu. The screen for the last
2. Select Storage Density from the Metric pull-down menu.
3. Select the media type for which you want the density metrics and the
4. Select Go. The Storage Density screen showing the selected metrics
U USB S
SE A
One Spectra Logic USB storage device is shipped with the library, but most
types of USB devices work. A USB storage device can be used for the
following:
Item
Firmware
Configuration
Traces
AutoSupport Log
Encryption export
68
User Guide
metric you viewed displays.
unit of measure for the density values.
displays (Figure 41).
Figure 41 The Storage Density metrics screen.
D
TORAGE EVICE
Description
Transferring firmware to the library for updating the library and its components
Saving and restoring the library configuration
Saving results of traces run on the library and its components
Creating AutoSupport logs. See
AutoSupport on page
Exporting a BlueScale encryption key for safekeeping
Configuring Mail Users on page 84
133.
and
90970015