Spectra Logic T-Series Spectra T50e User Manual page 78

Chapter 4 — Library Configuration
5. Using a standard web browser, go to Spectra Logic's
6. Enter the serial number and hardware ID for your library.
7. Select the number of slot upgrades you want to purchase. Each upgrade
8. Select Generate Key. Continue through the remaining pages, completing
9. Print the page showing the value of the generated activation key.
10. Follow the instructions in
78
User Guide
www.spectralogic.com/shop. A web page similar to the one shown in
Figure 47 displays asking for information about your library.
Figure 47 The purchase CoD web page.
enables one set of slots.
fields as prompted. Upon completion, an activation key is generated
that you will use to enable the additional slots.
the activation key. After you enable the new slots, you can add the slots
to any existing partition and can then import the media into the slots.
Note: To use slots 48 through 50, you must both purchase the
additional capacity and replace a drive bay with and LTO
cartridge capacity sled for each slot (see
Cartridge Capacity Sled on page
Contact SpectraGuard Technical Support (see
Spectra Logic on page
Enter library SN here.
Enter Hardware ID here.
(shown circled in
Enable Purchased Options
113).
6) for information.
Figure 46.)
(below) to enter
Add or Remove a
Contacting
90970015