Restore A Saved Configuration - Spectra Logic T-Series Spectra T50e User Manual

Chapter 10 — Library Troubleshooting
R S
ESTORE A AVED
If you previously saved the configuration to a USB storage device or
uploaded the configuration to a file on a computer (see
up the Library Configuration on page
restore the previously saved configuration.
Follow these steps to restore the configuration:
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Utilities. The Utilities screen displays.
3. Select Show Advanced. The Advanced Utilities Confirmation screen
4. Select Yes. The Utilities screen refreshes to show the advanced utilities
Figure 161 The Advanced Utilities screen.
5. Scroll through the list of advanced utilities and select one of the
194
User Guide
C
ONFIGURATION
displays.
(Figure 161).
following, as applicable for your situation.
Restore Library Configuration from Uploaded File. This utility restores
the library configuration from a file uploaded through the RLC.
This utility resets the library when completed.
Note: This option is only available when you access the library from a
web browser using the remote library controller (RLC).
Restore Configuration from Checkpoint. This utility restores the
library configuration from the checkpoint made at the last package
upgrade. This should only be run after a package downgrade. This
utility resets the library when completed.
Restore Library Configuration from USB. This utility restores the
library configuration from a USB device. The restore choices
available are the previously stored configurations. This utility resets
the library when completed.
Manually Backing
89), this section describes how to
90970015