Understanding User Groups And Security; Adding A New User - Spectra Logic T-Series Spectra T50e User Manual

Chapter 4 — Library Configuration

Understanding User Groups and Security

Before you begin, read this section to understand the three types of user
groups and what types of privileges each has. By default, passwords are
not required for any of the three default users.

Adding a New User

Follow these steps to assign a new library user to a user group.
1. Log into the library with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Select New.
74
User Guide
Note: If encryption is enabled, there is an additional, separate
Encryption user for accessing the encryption features. See
Setting Passwords and Other Identifiers on page 166
information about the encryption user.
Superuser – Controls all aspects of library use and configuration. Users
assigned to the Superuser group have total control of the library, which
includes defining other library users and their groups. The default user
name in this group is su.
Note: The library requires a minimum of one superuser. You cannot
delete the last member of the Superuser group.
Administrator – Configures and uses the library. With the exception of
creating or modifying library users, users in the Administrator group
have the same privileges as users in the Superuser group. The default
user in this group is Administrator.
Operator – Performs day-to-day operations. Users assigned to the
Operator group move, import, and export media, but cannot gain
access to more sensitive library operations such as Configuration,
Diagnostics, and Security. The default user in this group is Operator.
screen displays (Figure
Figure 43 The Library Users screen.
43).
for
90970015