Configuring Encryption - Spectra Logic T-Series Spectra T50e User Manual

Configuring Encryption

As long as the partition is using an LTO-4 tape drive, you can enable
encryption for the partition and assign one or more encryption keys to it.
See the Spectra BlueScale Encryption User Guide for detailed information
about enabling and configuring encryption for a partition.
The Encryption screen:
Follow these steps to configure encryption for the partition:
1. To work with encryption, make sure the Encryption screen appears.
Figure 96 The Encryption screen for
BlueScale Encryption Standard Edition.
2. Select the encryption options that you want.
3. Select Next. The Partition Users screen appears
December 2008
Appears if BlueScale Encryption is configured for the library, you are
logged in as an encryption user, and one or more encryption keys have
already been created
Has different options depending on whether you are using BlueScale
Encryption Standard Edition
Professional Edition (Figure
Figure 97 The Encryption screen for BlueScale
Encryption Professional Edition.
Note: You can skip selecting any encryption options and go to Step 3 if
you currently do not want to work with encryption.
(Figure 96) or BlueScale Encryption
97)
(Figure
Spectra T50e library
Create a New Partition
98).
125