Spectra Logic T-Series Spectra T50e User Manual page 126

Chapter 6 — Partition Management
Specifying Partition Users
To specify partition users:
1. In the Chambers and Drives screen or the Encryption screen, select
2. Select the users who will have access to the partition.
3. Select Next. The Drive IDs screen appears
Assigning Tape Drive IDs
Follow these steps to assign tape drive IDs:
1. In the Drive IDs screen
126
User Guide
Next. The Partition Users screen appears
Figure 98 The Partition Users screen.
Note: The Allow only list is a list of operators only. Select one or more of
these for partition-based security for operators.
Superusers and administrators still have access to all
partitions.
A SCSI ID that corresponds to each SCSI tape drive's type
Figure 99 The Drive IDs screen for SCSI tape drives.
-or-
(Figure
(Figure 99
(Figure 99 and Figure
98).
and Figure 100).
100), select either:
90970015