Spectra Logic T-Series Spectra T50e User Manual page 139

Deleting AutoSupport Profiles
Follow these steps to delete an existing profile.
1. Log into the library with superuser or administrator privileges.
2. From the toolbar menu, select Maintenance > AutoSupport. The
3. Select the Delete button next to the contact you want to delete. The
4. Select Yes. The AutoSupport profiles screen re-displays with the
Configuring Alarms
Follow these steps if you want the library to automatically generate an
AutoSupport Log Set (ALS) when a critical event occurs.
1. If you have not already done so, configure one or more AutoSupport
2. Select Configure Alarms from the AutoSupport screen. The AutoSupport
3. Select On > Next. When enabled, the library sends a AutoSupport
4. Select a value for the Drive Failures Threshold from the list and select
December 2008
AutoSupport screen displays (see
Remove Profiles screen displays, asking you to confirm the deletion.
updated list of profiles.
profiles as AutoSend recipients (see
AutoSupport Profiles on page
Alarm Handling screen displays.
Figure 115 The AutoSupport Alarms Handling screen.
ticket request whenever one of the events described on
Next. This is the only configurable critical event.
Figure 116 The AutoSupport Drive Failure Threshold screen.
Configure AutoSupport
Figure 107 on page
Creating or Modifying
135).
Spectra T50e library
136).
page 133 occurs.
139