Configuring Mail Users - Spectra Logic T-Series Spectra T50e User Manual

Chapter 4 — Library Configuration

Configuring Mail Users

Understanding Mail Users
You can configure mail users to receive on-demand output generated by
the library. This output may include the results of traces, utilities, or
automatic library messages. These are the same messages that you see in
the Messages screen.
Configuring Mail Users
Follow these steps to configure mail users:
1. Log in as a user in either the superuser or administrator group.
2. Select Configuration > Mail Users. The Mail Users screen appears
84
User Guide
Note: Network settings must be configured before mail settings. To
configure network settings, see
on page 82.
(Figure 54).
Figure 54 The Mail Users screen.
Note: The email address of autosupport@spectralogic.com appears by
default as part of the AutoSupport feature. However, you must
configure this mail user with the SMTP IP address of your mail
server before you can use it. To edit this user, select Edit. For
more information on AutoSupport, see
Changing the Network Settings
Chapter 7– AutoSupport.
90970015