Managing Firmware Packages; Setting Up Local Package Servers - Spectra Logic T-Series Spectra T50e User Manual

Uploading New Library Firmware
Follow these steps to upload library firmware:
1. Select the package to which you want to upgrade.
2. Select Update. After some brief progress screens, the Package Results
3. Select Finish. The library reboots.
If you are using the RLC to upgrade firmware, you must wait until the LC
re-initializes, then re-enter the library's IP address in your web browser.

Managing Firmware Packages

You have several management options:

Setting up Local Package Servers

You may choose to set up and use your own local server or servers to store
firmware packages downloaded from Spectra Logic. This may be useful,
for example:
To set up local package servers:
1. Identify the server or servers to locally store Spectra Logic library
December 2008
Note:
You may only select one firmware package.
screen displays.
Figure 176 The Package Results screen.
Note: You must select the Finish button to complete the upgrade
process; power cycling the library does not successfully
complete the upgrade.
Setting up Local Package Servers
Editing Firmware Servers on page 213
Deleting Firmware Servers on page 213
If you have multiple Spectra T50 libraries to update.
To keep local, in-house copies of all firmware packages that have been
(or will be) installed in your library.
firmware packages. Make sure that these servers can access the
Internet.
Update Library Firmware
below
Spectra T50e Library
211