Spectra Logic T-Series Spectra T50e User Manual page 85

3. Select New. The New Mail User screen appears
4. In the To field, enter the e-mail address of the party to receive messages.
5. Enter a value in the From field, like the name of the library; do not use
6. In the SMTP IP Address field, enter the IP address of your SMTP server,
7. Select any message types this user should receive automatically. See
December 2008
Figure 55 New Mail User screen.
Use the full address with the @ symbol, and do not use any spaces in
the e-mail address. To include multiple addresses, leave a space
between each address.
Example: system.administrator@yourcompany.com
spaces.
Example: SpectraT50Library1
Note: Check with your network administrator for requirements
regarding the From field. E-mail messages from the library may
not get through your mail server if the From address is not
recognized.
using the standard IP format.
Example: 123.456.7.8
Checking Messages on page
(Figure
66.
Spectra T50e library
Library Settings
55).
85