Spectra Logic T-Series Spectra T50e User Manual page 169

Logging Into the Encryption Application
1. Log in as a superuser, then select Security > Encryption. The
2. Select OK. No login or password is required the first time you log in.
3. Proceed to
December 2008
Encryption User Login screen displays
Figure 135 The Encryption User Login screen.
The Encryption Configuration screen displays
Figure 136 The initial Encryption Configuration screen.
Note: If you are configuring encryption for the first time, an encryption
key has not been created, so there is no encryption key moniker
to display.
Configuring the Encryption Initialization Mode and
Password.
Configure Encryption
(Figure 135).
(Figure 136).
Spectra T50e library
169