Spectra Logic T-Series Spectra T50e User Manual page 100

Chapter 5 — Cartridge Use
4. Select Add Move for each cartridge that you wish to import and move.
5. Insert a cartridge into the open door, ensuring that it is correctly
6. Wait for the process task bar to disappear.
7. Gently push the access port door closed.
The library moves the cartridge, then opens the Access port door for the
next cartridge, if needed. The library repeats the steps (open door, move
cartridge) for each queued move.
100
User Guide
Figure 68 Inventory Add Move screen.
When you have set up all of the moves, select Start Moves. The library
opens the Access port.
oriented.
Bar code label
facing out
Figure 69 Access port door.
Note: Do not use force to push the door closed.
Note: If you wish to "swap" cartridges, use the Open Door option,
move a cartridge to the Access Port, remove the cartridge and
replace it with the new cartridge before closing the door. The
library moves the new cartridge into the slot where the old slot
was located.
90970015