Spectra Logic T-Series Spectra T50e User Manual page 116

Chapter 5 — Cartridge Use
1. Remove the cartridges in the expansion slots from any partitions that
2. Use the inventory screen to move the cartridge out of the sled to a
3. Power the library off (press and hold the front panel power button for
4. Access the back of the library.
5. Loosen the screws securing the cartridge capacity sled.
6. Slide the sled straight out of the library and place it in its original
116
User Guide
they report to prior to removing the sled from the library (Configuration
> Partitions).
different slot (General > Inventory).
Note: If an empty slot is not available, remove the cartridge after you
remove the sled from the library or export the cartridge via the
Access Port door.
one second). The power-off sequence takes approximately two minutes
while the library allows applications to shut down gracefully.
packaging.
Figure 90 Removing a Cartridge Capacity Sled.
90970015