Verify The Configuration Backup - Spectra Logic T-Series Spectra T50e User Manual

Chapter 4 — Library Configuration
5. Scroll through the list of utilities and select Save Library Configuration.
The save library configuration to USB option is only available if you connect the
Important
USB key to the library USB port before you access the advanced utilities.
6. Choose whether to save the configuration to USB or to email it to an
7. Select Run.
8. Confirm that the backup was successful, as described in

Verify the Configuration Backup

After creating a backup of your library configuration, verify that the
backup was successful as soon as possible after you create it.
Backup Saved to a USB Key
1. Plug the USB key into a PC that is not connected to the library.
2. Examine the list of files on the USB key and locate the SavedConfigs
3. Open the SavedConfigs folder and verify that a folder corresponding to
90
User Guide
The screen refreshes to show the details for the utility
name1@yourcompany.com
name2@your company.com
Figure 60 The Save Library Configuration utility.
already-configured mail recipient (see
page 84).
Select Send results to Mail User: to send the library configuration file
as an email attachment to the specified mail recipient.
Note: Do not use the default autosupport@spectralogic.com
email recipient.
Select Save results to USB Key to save the library configuration file to
a USB key.
After a brief delay, the Utility Results screen re-displays, showing that
the configuration file was either saved or sent.
Configuration Backup.
folder.
the date and time you created the backup is present.
(Figure
Configuring Mail Users on
Verify the
60).
90970015