Spectra Logic T-Series Spectra T50e User Manual page 67

Item Description
IP Address If you are managing the library from the touch screen, the library's IP address is
displayed on the status bar. If you are accessing the library remotely, the library's name,
if set, is shown in place of the library's IP address.
To find the library's IP address when accessing the library remotely, select
Configuration > Network
IP address of the library.
Metrics
The library includes the following metrics for monitoring the operation of your library
and its tape drives.
Monitoring Power Consumption
Viewing Storage Density on page 68
Monitoring Power Consumption
The Power Consumption Monitor allows you to monitor the amount of
power your library is using.
Follow these steps to view the power consumption data for the library.
1. Select General > Metrics from the toolbar menu. The screen for the last
2. Select which power consumption metric you want to view from the
3. Select Go. A screen showing the selected metric displays
December 2008
. If static addressing is in use, the Network screen shows the
metric you viewed displays.
Metric pull-down menu:
Power Consumption
Power Consumption (kWh)
Power Consumption (kWh/Ft
Power Consumption (kWh/Ft
Power Consumption (kWh/TB)
Figure 40 The Power Consumption metrics screen.
Note: The numbers provided are estimates.
(following section)
2
)
3
)
Library Screen Use
Menu >
(Figure 40).
Spectra T50e library
67