Spectra Logic T-Series Spectra T50e User Manual page 138

Chapter 7 — AutoSupport
8. Select Next. The Summary screen displays
9. Repeat the steps to create additional profiles.
138
User Guide
the information shown is correct.
Figure 113 The Profile Summary screen.
If any information needs to be changed, select Previous to display the
screen in which the changes need to be made.
When all of the information is correct, select Save. The AutoSupport
Profiles screen re-displays, listing the newly completed profile (see
Figure 114).
Figure 114 The updated AutoSupport Profiles screen.
Note: When you create multiple profiles, they are listed in the order in
which they are created, not in alphanumeric order.
If one of the profiles is configured as an AutoSend recipient, the
Configure Alarms button is active (see
(Figure 113). Verify that all of
Figure 107 on page 136).
90970015